Bring Your Beer Right to you with a Beer Keg Tap
Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. Kegs are very ideal to those who drink a lot which is also cost effective and money saving. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. If you do not know how to use a keg tap, then you can waste a lot of beer, and this is why you need to be careful is using it since it is actually easy to use. Foam can be released from the keg tap if not done properly, and it can go all over your face or your body. Getting beer from a keg tap looks easy but it is not as easy as it looks.
The release of the beer is regulated by the keg tap. You can release beer from the keg tap with the use of a lever and through pulling and pressing it. When pressure is released, it pushes the beer up and into the glass. Technically, a keg tap is a switch that you can turn of or off or you can switch to open or close.
You can minimize the foam created when pouring by placing the beer keg in a steady position for a short while. When there is too much movement while transporting the keg, the foam builds up. In order to minimize the foal, place the keg where you plan to serve the beer and let it stay for a while. You should remove the cap or seal since it is harder to tap with it. Pros don’t remove the cap or seal because they know how not to put the beer at risk. Since we are not pros we should play it safe.
Tapping with CO2 is done with portable keg systems. Party pump is when pressure is receive by the keg in a single unit pump and tap combination. The beer keg tap is separated from the keg. To release the pressure in the ked, the pump is attached and the faucet is opened. You can release beer by applying air pressure to the keg by pumping and pushing the lever or the tap handle.
When beer is mixed with air, it begins to lose its flavor and this is the reason why a pony keg or a portable keg should be consumed in a single day when the beer already loses its flavor. Traditional keg uses an on and off valve. This types works by gravity and there is no need for air pressure. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.